• Phone: +49 (0) 40-66 999 2-0
  • Fax: +49 (0) 40-66 999 222
  • info@berghoefer-hamburg.de

Type FF41

Contact

Type FF41

Pressure

Structure

  • BaIg PN 16 with fixed flanges PN 10 drilled

Nominal size

  • Nominal size DN 15 - DN 250
  • Optional: up to DN 3000

Materials

  • Flanges made of steel, optionally stainless steel
  • BaIg PN 16 made of 1.4541, optionally also 1.4571 or 1.4828

pressure levels

  • PN 16 (BD 16 bar, BT 20°C)
  • Optional: PN 1 to PN 40

Overall length

  • Standard overall lengths according to table
  • All special lengths possible
FF41
Note
The specified movement shots should not occur simultaneously, as this can cause the compensator to deflect.
DN BL A axial angular lateral wqs D b LK n B
Nominal size Overall length Outer diameter movement angular lateral Effective cross section Diameter Blade thickness Bolt circle Number of holes Diameter bore
in mm Ø in mm in mm in ° in mm cm² Ø in mm in mm Ø in mm Bohrungen Ø in mm
DN15 to DN250: both sides PN10
15 100 36 10 30 5.5 7 95 14 65 4 14
20 100 36 10 30 5.5 7 105 16 75 4 14
25 105 42 12.5 30 6.5 10 115 16 85 4 14
32 120 50 12.5 28 6.5 14.5 140 16 100 4 18
40 125 60 12.5 23 6 22 150 16 110 4 18
50 150 75 15 22 7 34 165 18 125 4 18
65 155 90 20 25 8.5 50 185 18 145 4 18
80 165 110 22.5 23 8.5 74.5 200 20 160 8 18
100 170 133 22.5 19 7 111 220 20 180 8 18
125 185 157 22.5 16 6.5 159 250 22 210 8 18
150 205 190 32.5 19 9 236 285 24 240 8 22
200 235 250 32.5 14 8 419 340 24 295 8 22
250 240 300 32.5 12 6.5 615 395 26 350 12 22